retzen.blogg.se

1. Standard sata ahci controller driver 8.1 drivers#
2. Standard sata ahci controller driver 8.1 manual#
3. Standard sata ahci controller driver 8.1 windows 10#
4. Standard sata ahci controller driver 8.1 windows 8#

Missing Standard Sata Ahci Controller Manual Driver Installationįorcing a manual driver installation via Device Manager on these systems is not supported and may cause stability and performance issues with some mass storage devices, such as solid-state drives (SSD).

The AMD SATA controller component is not compatible with and will not be offered nor installed by the chipset driver package on AMD desktop systems running Window 10 or using AMD Socket AM4 and Socket TR4 chipsets.

Standard sata ahci controller driver 8.1 drivers#

Standard sata ahci controller driver 8.1 windows 10#

Standard sata ahci controller driver 8.1 windows 8#

If you open Device Manager, you will see that Windows 8 / 8.1 / 10 / 11 now uses a standard SATA AHCI controller. Running this command will allow Windows 8 / 8.1 / 10 / 11 to restart in normal mode.Īnd Windows 8 / 8.1 / 10 / 11 starts up smoothly and without causing a blue screen, despite changing the controller mode from "IDE" to "AHCI". Restart your computer and press the "Delete" or "Del" key several times before Windows starts to enter your computer's BIOS.Ĭhange the controller mode in your computer's BIOS to AHCI by referring to our " Change the hard disk controller mode (IDE, AHCI or RAID)" tutorial.Īfter you change the controller mode in your computer's BIOS, Windows 8 / 8.1 / 10 / 11 will boot into Safe Mode.īut, the wallpaper will be black and the network which is unavailable in this configuration of safe mode.Īlthough nothing was displayed regarding AHCI support, Windows 8 / 8.1 / 10 / 11 has automatically changed its configuration to support AHCI from now on.Īgain open a command prompt (cmd.exe) as administrator and type this command : With this command, Windows 8 / 8.1 / 10 / 11 will always start in Safe Mode.

To do this, open a command prompt (cmd.exe) as administrator and type this command : In order for Windows 8 / 8.1 / 10 / 11 to start correctly (without causing a blue screen), Windows must start in safe mode immediately after changing the controller mode in your computer's BIOS. When your computer is configured to use an "IDE" controller mode, the Device Manager will display these devices in the "IDE ATA/ATAPI controllers" section. Then, an "INACCESSIBLE_BOOT_DEVICE" blue screen will appear. You restart your computer and the Windows 8 / 8.1 / 10 / 11 logo appears. You change the controller mode in your computer's BIOS. However, if Windows is already installed on your computer and the controller mode is still on IDE, you will need to do a little manipulation before changing controller mode in your computer's BIOS. This helps maximize compatibility with existing operating systems.Īlthough the operating systems (including Windows) work very well with this "IDE" controller mode, we still recommend that you use the AHCI (Advanced Host Controller Interface) which allows you to benefit from better performance thanks to new smarter features. When you buy a computer, the BIOS in the computer's motherboard is configured by default to use controller mode : IDE.